职称：讲师
办公地点：广东工业大学实验3号楼205室
电子邮件：s.li@gdut.edu.cn
联系方式：13544477828
个人介绍：李晟，讲师，广东工业大学“青年百人计划”B类引进人才。2017年博士毕业于英国伯明翰大学冶金与材料学院，并与伯明翰大学开展多年博士后研究工作。自2012年开展增材制造相关研究，熟练掌握结构设计、工艺策略优化、设备结构、设备操作、后处理、材料表征、力学性能、工程应用等增材制造全套技术，与罗·罗、空中客车、赛峰、英宇航、欧空局、MBDA、DSTL、本田F1等国际知名企业有丰富的项目合作经验。
研究方向：金属增材制造；陶瓷增材制造；金属丝激光熔化及成型
教育背景：2012.10–2017.07：英国伯明翰大学，材料学博士，硕博连读，导师：Moataz Attallah
2007.09–2011.06：武汉科技大学，材料成型及控制工程，工学学士(湖北省优秀毕业论文)
研究成果：
1. Sheng Li, Hany Hassanin, Moataz M. Attallah*, Nicholas J.E. Adkins, Khamis Essa, The Development of TiNi-based Negative Poisson's Ratio Structure Using Selective Laser Melting, Acta Materialia, Volume 105, 15 February 2016, P75–83, doi:10.1016/j.actamat.2015.12.017
2. Chaolin Tan, Sheng Li*, Khamis Essa, Kesong Zhou*, Moataz M. Attallah*, Laser Powder Bed Fusion of Ti-rich TiNi lattice structures: Process optimisation, geometrical integrity, and phase transformations, April 2019, International Journal of Machine Tools and Manufacture 141(2019):19-29 [指导学生]
3. Sheng Li, Nicholas J.E. Adkins, Stephen McCain, Moataz M. Attallah*, Suspended droplet alloying: A new method for combinatorial alloy synthesis; nitinol-based alloys as an example, Journal of Alloys and Compound, Volume 768, 5 November 2018, Pages 392-398
4. Sheng Li, Biao Cai*, Ranxi Duana, Lei Tang, Zihan Song, Dominic White, Oxana V. Magdysyuk, Moataz Attallah*, High Strength Al-Cu/TiB2 Composite Fabricated by Laser Powder Bed Fusion: Microstructure and Mechanical Properties, Acta Metallurgica Sinica (English Letters), Volume 35, Issue 1, Pages 78-92
5. Di Wang, Sheng Li*, Guowei Deng, Yang Liu, Moataz M Attallah*, A melt pool temperature model in laser powder bed fabricated CM247LC Ni superalloy to rationalize crack formation and microstructural inhomogeneities, Metallurgical and Materials Transactions A, Volume 52, Issue 12, Pages 5221-5234
6. Sheng Li, Minshi Wang, Khamis Essa, Chunlei Gan, C Liu, Moataz Attallah*, Effect of Stoichiometry on Shape Memory Properties of Ti-Ni-Hf-Cu-Nb Shape Memory Alloys Manufactured by Suspended Droplet Alloying, Solids, Volume 3, Issue 1, Pages 1-21
7. Xiaozhu Wen, Cheng Guo, Xiaobang Shang, Yang Yu, Minjie Shu, Qian Yang, Sheng Li*, Moataz M Attallah*, Hongzhong Liu, Anxue Zhang, SLM printed waveguide dual-mode filters with reduced sensitivity to fabrication imperfections, IEEE Microwave and Wireless Components Letters, Volume 31, Issue 11, Pages 1195-1198
7. Ji Zou. Y. Gabera, G. Voulazeris, Sheng Li, L.Vazquez, Lei-Feng Liu, M.Y. Yao, Y.J.Wang, M.Holynski, K.Bongs, M.M.Attallah*, Controlling the grain orientation during Laser Powder Bed Fusion to tailor the magnetic characteristics in a Ni-Fe based soft magnet, Acta Materialia, Volume 158, 1 October 2018, Pages 230-238
8. Ranxi Duan, Sheng Li, Biao Cai*, Weiwei Zhu, Fuzeng Ren*, Moataz Attallah*, In situ alloying based selective laser melting of β Ti-Mo-Zr-Fe alloy achieving an excellent combination of high strength and low modulus, Additive Manufacturing, Accepted [指导学生]
9. Chuan Guo, Sheng Li, Shi Shi, Xinggang Li, Xiaogang Hu, Qiang Zhu*, R. Mark Ward*, Effect of processing parameters on surface roughness, porosity and cracking of as-built IN738LC parts fabricated by laser powder bed fusion, Journal of Materials Processing Technology Volume 285, November 2020, 116788 [指导学生]
10. Peng Chen, Sheng Li, Yinghao Zhou, Ming Yan, Moataz M. Attallah*, Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying, January 2020, Journal of Materials Science and Technology. 2020.01.002 [指导学生]
11. Nikolina Kovacev, Sheng Li, Khamis Essa, Effect of the preparation techniques of photopolymerizable ceramic slurry and printing parameters on the accuracy of 3D printed lattice structures, Journal of the European Ceramic Society, Volume 41, Issue 15, Pages 7734-7743
12. Nikolina Kovacev, Sheng Li, Soheil Rezaei, Hassan Hemida, Athanasios Tsolakis, Khamis Essa, Effects of the internal structures of monolith ceramic substrates on thermal and hydraulic properties: Additive manufacturing, numerical modelling and experimental testing, International Journal of Heat and Fluid Flow, Minor correction. [指导学生]
13. Chaolin Tan, Ji Zou, Sheng Li, Parastoo Jamshidi, Alex Forsey, Alessandro Abena, Richard J. Moat, Khamis Essa, Minshi Wang, Kesong Zhou*, Moataz M. Attallah*, Additive Manufacturing of Bio-inspired Multi-scale Hierarchically Strengthened Martensitic Shape Memory Alloy, International Journal of Machine Tools and Manufacture, Volume 167, 103764 [指导学生]
14. Peng Chen, Chao Yang, Sheng Li, Moataz M. Attallah*, Ming Yan*, In-situ alloyed, oxide-dispersion-strengthened CoCrFeMnNi high entropy alloy fabricated via laser powder bed fusion. Materials & Design In press, journal pre-proof. Available online 11 July 2020, Article 108966 [指导学生]
15. Huaiyuan Gu*, Sheng Li, Martyn Pavier, Moataz M. Attallah, Haris Paraskevoulakos, Anton Shterenlikht, Fracture of three-dimensional lattices manufactured by selective laser melting, July 2019, International Journal of Solids and Structures 180-181 (JCR 2, IF: 3.2)
16. Di Wang, Yimeng Wang, Yongqiang Yang*, Sheng Li, Dongyun Zhang, Research on Design Optimization and Manufacturing of coating Pipes for Automobile seal Based on Selective Laser Melting, May 2019, Journal of Materials Processing Technology 273, DOI: 10.1016/j.jmatprotec.2019.05.008
17. Di Wang, Shibiao Wu, Yongqiang Yang*, Wenhao Dou, Shishi Deng, Zhi Wang, Sheng Li, The Effect of a Scanning Strategy on the Residual Stress of 316L Steel Parts Fabricated by Selective Laser Melting (SLM), Materials 2018, 11(10), 1821
科研项目：
1. 2021.03-2021.10：高稳定性、高功率微波器件增材制造研究，空中客车公司，欧洲航天局，主要研究人员。
2. 2020.06-2021.03：镍基高温合金叶片增减材制造 (Hybrid Additive Manufacturing of CM247 Ni-superalloys)，MBDA, BAE systems，主要研究人员。
3. 2020.01-2020.06：增材制造高性能热交换器 (Additive Manufacturing of high performance heat exchanger)，Collins Aerospace，项目完成人。
4. 2019.07-2021.07：高通量生物医用镍钛合金设计与制造关键技术研究，广东省科技创新战略专项资金（国际科技合作领域—重点国别及“一带一路”科技合作项目专题）。
5. 2018.04-2020.09：高性能催化载体陶瓷和金属网格结构增材制造 (FACE - Novel Integrated Fuel Reformer-Aftertreatment System for Clean and Efficient Road Vehicles, Additive Manufacturing of Catalysts for Automotive Applications)，EPSRC项目，主要研究人员。
6. 2018.09-2021.09：个性化订制3D打印植入体 (Industrialisation of 3D Printing Personalised Customisation Implant)，广州市对外合作项目2018 GDASCX-011，主要研究人员。
7. 2018.05-2019.05：3D打印高性能滤波器 (3D Printing of Microwave Filter)，欧洲航天局，空中客车公司，主要研究人员。
8. 2017.01-2018.09：铝合金与镍基高温合金增材制造技术 (Development of Powder Bed Additive Manufacturing: Al Alloys and Ni-based Superalloys)，本田技研中心 (F1)，项目完成人。
2017.05-2020.04：生物医用镍钛形状记忆合金关键成型技术 (Study on Forming Technology and Exemplary Application of Medical used nitinol alloys)，广州市科技创新委员会，主要研究人员。
9. 2016.10-2017.10：粉末床增材制造高性能蒸发管 (Selective Laser Melting of In718 Heat Pipes with Controlled Porosity Structure)，罗尔斯·罗伊斯公司，项目完成人。
10. 2013.04-2014.04 增材制造负泊松比吸能结构 (The Development of Negative Poisson's Ratio Armor Structure Using Additive Manufacturing)，国防科学与技术实验室，项目完成人。
11. 2012.10-2016.06：快速冶金 (Accelerate Metallurgy Project)，欧洲航空航天局欧盟FP7项目，主要研究人员。
