4.主持或参与的主要项目

1. 非晶合金微创手术器械精密高效制造理论与工艺.国家自然科学基金重点支持项目. 2018.01-2022.12. 经费：300万，项目负责人：王成勇；

2. 精密医疗器械五轴联动加工中心研制及产业化.广东省应用型客机项目. 2018.1.1-2019.12.31. 经费：300万，项目负责人：王成勇；

3. 关节镜微创手术器械关键制造技术研究及产业化.广东省科技计划项目.经费：50万，2017.01-2018.12（合作申报，广工30%）项目负责人：王成勇；

4. 膝关节关节镜清理术中生物组织的高效低损伤刨削切除研究,国家自然科学基金项目（51475094），研究经费：140.0万，起止时间：2015.1 - 2018.12；

5. 高速硬铣削加工多层多元纳米复合涂层刀具及其切削性能研究，国家自然科学基金项目，研究经费：220.0万元，起止时间：2013.01-2016.12；

6. 复杂模具型面的非牛顿流体微磨料浆体射流低压可控定量抛光，国家自然科学基金项（51075076），研究经费：42万,起止日期：2011-2013；

7. 超高速钻削多层密度印刷电路板超微细孔加工研究，国家自然科学基金－广东联合基金重点项目，研究经费：150万，起止日期：2008-2011；

8. 高速铣削淬硬钢的多元纳米复合涂层刀具研究，国家自然科学基金项目：（50775045），研究经费：32万，起止日期：2008-2011；

9. 三维精密微细结构微磨料气射流加工理论研究，国家自然科学基金项目，研究经费：26万，起止日期：2005-2007；

10. 能耗动态监测平台建设，建设部节能监管体系建设专项，研究经费：400万，起止日期：2010-2012；

11. 高强度钢、淬硬钢大型零件高效切削技术及应用，国家863计划《高速、精密切削与磨削技术》重点项目，研究经费：14万，起止日期：2009-2010；

12. 碳纤维-钛层间混杂复合材料孔加工刀具设计与制造技术，广东省省部产学研合作专项资金项目(2010B090400346)，研究经费：80万，起止日期：2010-2013；

13. 高精度圆光栅玻璃超精密研磨加工装备与工艺，广东高校产学研结合示范（创新培养）基地和科技成果转化项目，研究经费：100万，起止日期：2010-2012；

14. 环保型高密度互连印刷电路板用精密微型刀具开发及产业化，广东省省部产学研合作专项资金项目(项目（2008B090500130），研究经费：40万，起止日期：2009-2010；

1. 获奖情况

1. 2014年 “难加工脆性碳素零部件的高速精密加工关键技术及应用”获得广东省科学技术一等奖（应用技术类）

2. 2010年 广东省“千百十”工程国家级培养对象；

3. 2009年 获第四届广东省高校教学名师奖；

4. 2009年 “硬脆材料切削、磨削与抛光加工方面的研究”获广东省科技奖（自然科学类）二等奖

5. 2006年 “注塑成型模具超精密加工关键技术研究”获得广东省科学技术二等奖（应用成果）；

6. 2001年 广东省“千百十工程”先进个人优秀奖称号；

7. 1995年 《切削力学新编》获国家教委科技进步三等奖；

8. 1994年 南粤教坛新秀称号。

1. 近期主要论文、著作

SCI杂志收录论文74篇(主要论文):

1. Feng D, Tang D, Wang C, et al. Microstructure of Hardened Steel at High Temperature and High Strain Rate[J]. Transactions of Nanjing University of Aeronautics & Astronautics, 2017, 34(4):380-387.

2. Wang C, Lin H, Wang X, et al. Effect of different oil-on-water cooling conditions on tool wear in turning of compacted graphite cast iron[J]. Journal of Cleaner Production, 2017, 148:477-489.

3. He H Y , Wang C Y，et al. Cutting mechanism during orthogonal cutting in a craniotomy[J]. Journal of Engineering in Medicine，2017.

4. Yuan Y, Qin Z, Yu D H, et al. Relationship of microstructure, mechanical properties and hardened steel cutting performance of TiSiN-based nanocomposite coated tool[J]. Journal of Manufacturing Processes, 2017, 28.

5. Zhang Y, Wang C, Zhou S, et al. A Comparison Review on Orthopedic Surgery Using Piezosurgery and Conventional Tools ☆[J]. Procedia Cirp, 2017, 65:99-104.

6. Chen Z, Wang C, Jiang W, et al. A Review on Surgical Instruments of Knee Arthroscopic Debridement and Total Hip Arthroplasty ☆[J]. Procedia Cirp, 2017, 65:291-298.

7. Yuan Z, Wang C, Chen K, et al. Amorphous Silicon Nanowires Grown on Silicon Oxide Film by Annealing:[J]. Nanoscale Research Letters, 2017, 12(1):487.

8. Wang R J, Wang C Y, Wen W, et al. Experimental study on a micro-abrasive slurry jet for glass polishing[J]. International Journal of Advanced Manufacturing Technology, 2016:1-12.（SCI三区）

9. Wu S, Zhao Z, Wang C Y, et al. Optimization of toolpath with circular cycle transition for sharp corners in pocket milling[J]. International Journal of Advanced Manufacturing Technology, 2016:1-11.（SCI三区）

10. Wang C, Ding F, Tang D, et al. Modeling and simulation of the high-speed milling of hardened steel SKD11 (62 HRC) based on SHPB technology[J]. International Journal of Machine Tools & Manufacture, 2016, 108:13-26.（SCI二区）

11. Wang H, Lin H, Wang C, et al. Laser drilling of structural ceramics—A review[J]. Journal of the European Ceramic Society.（SCI二区）

12. Li S, Wang C, Zheng L, et al. Dynamic stability of cemented carbide circular saw blades for woodcutting[J]. Journal of Materials Processing Technology, 2016, 238:108-123.（SCI二区）

13. Li S, Zheng L J, Wang C Y, et al. Micro drilling quality of the Cu/BT laminate for IC substrate[J]. Circuit World, 2016, 42(2):55-62.（SCI四区）

14. Zheng L, Wang C, Zhang X, et al. The tool-wear characteristics of flexible printed circuit board micro-drilling and its influence on micro-hole quality[J]. Circuit World, 2016, 42(4).(SCI四区)

15. Wu shixiong，MaWei, Li Bin, Wang chengyong. Trochoidal machining for the high-speed milling of pockets[J]. Journal of Materials Processing Technology, 2016, 233: 29-43.（SCI二区）

16. Wu shixiong, Ma Wei, Bai haiping, Wang chengyong, and Song yuexian. Engagement Angle Modeling for Multiple-circle Continuous Machining and Its Application in the Pocket Machining[J]. Chinese Journal of Mechanical Engineering, 2016, 2016 录用.（SCI四区）

17. Liu, W., Li, A., Wu, H., He, R., Huang, J., & Wang C et al. (2016). Effects of bias voltage on microstructure, mechanical properties, and wear mechanism of novel quaternary (Ti, Al, Zr)n coating on the surface of silicon nitride ceramic cutting tool. Ceramics International, 42(15), 17693-17697.（SCI二区）

18. Zhang, J., Long, Y., Liao, S., Lin, H. T., & Wang C. (2016). Effect of laser scanning speed on geometrical features of Nd:YAG laser machined holes in thin silicon nitride substrate. Ceramics International.（SCI二区）

19. Liu, W., Li, A., Wu, H., Long, Y., Huang, J.,Wang C. & Deng, X., et al. (2016). Effects of gas pressure on microstructure and performance of (Ti, Al, Zr)n coatings produced by physical vapor deposition. Ceramics International, 42(15), 17436-17441.（SCI二区）

20. Yu, D. H., Wang, H., Wang, C. Y., Yuan, Y. H., & Ding, F. (2016). Chip Formation of S790 Hardned Steel under High Speed Dry Milling Condition. Materials Science Forum (Vol.836-837, pp.77-87).（EI收录）

21. Huang X, Chen Z S, Wang C Y, et al. Measurement of Micro-Drill Breakage during PCB Drilling[J]. Materials Science Forum, 2016, 836-837(2):592-599（EI收录）.

22. Xie Y X, Wang C Y, Ding F, et al. Parameters Optimization Research of High-Speed Milling PM60 Mould Steel Based on Taguchi Method[C]. Materials Science Forum. 2016.（EI收录）

23. Lin H, Wang C, Yuan Y, et al. Tool wear in Ti-6Al-4V alloy turning under oils on water cooling comparing with cryogenic air mixed with minimal quantity lubrication. International Journal of Advanced Manufacturing Technology, 2015, 81(1):1-15.

24. Zhou, L., Wang C., Li, W., & Zhai, Y. (2016). Effect research of geometry parameter of micro endmill on high speed precision milling of brittle isotropic graphite part. Tool Engineering.

25. Zheng L. The entry drilling process of flexible printed circuit board and its influence on hole quality. Circuit World, 2015, 41(4):147-153.

26. ChengyongWang*, YingxingXie, LijuanZheng, ZheQin, DewenTang, YuexianSong. Research on the chip formation mechanism during the high-speed milling of hardened steel. International Journal of Machine Tools and Manufacture, 2014,79（4）:31–48.

27. Zheng L J, Wang C Y, Qu Y P, et al. Interaction of cemented carbide micro-drills and printed circuit boards during micro-drilling. International Journal of Advanced Manufacturing Technology, 2014, 77(5-8):1305-1314.

28. Lin fang Wang, Li juan Zheng, Cheng yong Wang, Shan Li, Yue xian Song, Lun qiang Zhang, Peng Sun. Experimental study on micro-drills wear during high speed of drilling IC substrate. Circuit World, 2014, 40(2):61-70(10).

29. Zheng L, Wang C, Yang L, et al. Characteristics of chip formation in the micro-drilling of multi-material sheets. International Journal of Machine Tools & Manufacture, 2012, 52(1):40–49.

30. Zhou H, Wang C, Deng J, et al. Radial Grip Rigidity of the Matching of Lengthened Shrink-fit Holder and Cutter in High-speed Milling. Chinese Journal of Mechanical Engineering, 2012, 25(1):179-183.

31. Zhang Q L, Wang C Y, Hu Y N, et al. Experimental Study on the Dynamic Characteristics of High Speed Milling on Inclined Planes. Advanced Materials Research, 2011, 188:99-103.

32. Zhang F L, Yang Z F, Zhou Y M, et al. Fabrication of grinding tool material by the SHS of Ni–Al/diamond/dilute. International Journal of Refractory Metals & Hard Materials, 2011, 29(3):344–350.

33. Fan J M, Li H Z, Wang J, et al. A study of the flow characteristics in micro-abrasive jets. Experimental Thermal & Fluid Science, 2011, 35(6):1097-1106.

34. Zhou Y M, Zhang F L, Wang C Y. Effect of Ni–Al SHS reaction on diamond grit for fabrication of diamond tool material. International Journal of Refractory Metals & Hard Materials, 2010, 28(3):416-423.

35. L. Zhou, C. Y. Wang, Z. Qin. Investigation of Chip Formation Characteristics in Orthogonal Cutting of Graphite. Materials & Manufacturing Processes, 2009, 24(12):1365-1372.

36. Wang C Y, Zhou Y M, Zhang F L, et al. Interfacial microstructure and performance of brazed diamond grits with Ni–Cr–P alloy. Journal of Alloys & Compounds, 2009, 476(1):884-888.

37. Yang Y X, Wang C Y, Zhe Q, et al. Drilling force and temperature of bone by surgical drill. Advanced Materials Research, 2010, 126-128:779-784.

38. Yu D, Wang C, Cheng X, et al. Microstructure and properties of TiAlSiN coatings prepared by hybrid PVD technology. Thin Solid Films, 2009, 517(17):4950–4955.

39. Zhou L, Wang C.Y. and Qin Z. Tool Wear characteristics in high speed milling of graphite using micro coated carbide endmill. Proceedings of the Institution of Mechanical Engineers, Part B. Journal of Engineering Manufacture, 2009, 223(2): 267-277.

40. Yu D.H., Wang C.Y, Cheng X.L. and Song Y.X.. TiAlSiN coatings prepared by hybrid PVD technology for high speed milling of hardened steel. Advanced Materials Research, 2009, 69-70: 423-427.

41. Tang D W, Wang C Y, Hu Y N, et al. Finite-Element Simulation of Conventional and High-Speed Peripheral Milling of Hardened Mold Steel. Metallurgical & Materials Transactions A, 2009, 40(13):3245-3257.

42. Yu D, Wang C, Cheng X, et al. Optimization of hybrid PVD process of TiAlN coatings by Taguchi method. Applied Surface Science, 2008, 255(5):1865-1869.

43. Zhang F.L., Zhu M. and Wang C.Y.Parameters optimization in the planetary ball milling of nanostructured tungsten carbide/cobalt powder. International Journal of Refractory Metals & Hard Materials, 2008, 26(4): 329-333.

44. Zhou H, Wang C, Zhao Z. Dynamic characteristics of conjunction of lengthened shrink-fit holder and cutting tool in high-speed milling. Journal of Materials Processing Technology, 2008, 207(s 1–3):154-162.

45. Yumei Zhou, Chengyong Wang, Fenglin Zhang, et al. Cr Powder-Activated Induction Brazing of Diamond Grits with Ag–Cu–Zn Alloy. Materials & Manufacturing Processes, 2008, 23(4):352-356.

46. Zhao Z Y, Wang C Y, Zhou H M, et al. Pocketing toolpath optimization for sharp corners. Journal of Materials Processing Technology, 2007, 192:175-180.

47. Wang Chengyong, Zhou Li, Fu Hao, Hu Zhouling. High speed milling of graphite electrode with endmill of small diameter. Chinese Journal of Mechanical Engineering, 2007, 20(4):27-31

48. Zhang F L, Wang C Y, Chen Z N G J. Effect of Electrical Spark Discharging Parameters on the Etching of Chemical Vapor Deposition (CVD) Diamond Film. Materials & Manufacturing Processes, 2007, 22(22):859-864.

49. Hu Z L, Wang C Y, Zhou L, et al. Cutting Parameters Optimization of High-Speed Milling of Thin-Walled Graphite Electrode. Key Engineering Materials, 2006, 315-316:319-323.

50. Wang C Y, Chen C, Song Y X. Mechanochemical Polishing of Single Crystal Diamond with Mixture of Oxidizing Agents. Key Engineering Materials, 2006, 315-316:852-855.

51. Hu Y N, Wang C Y, Ding H N, et al. Wear Mechanism of Diamond Saw Blades for Dry Cutting Concrete. Key Engineering Materials, 2006, 304-305:315-319.

52. Wang C Y, Zhang F L, Kuang T C, et al. Chemical/mechanical polishing of diamond films assisted by molten mixture of LiNO3 and KNO3. Thin Solid Films, 2006, 496(2):698–702.

53. Yuan H, Cheng Y P, Wang C Y, et al. Edge Grinding of Ceramic Tile by Diamond Cup Wheels. Key Engineering Materials, 2006, 304-305:85-89.

54. Wang CY, Hu YN, Wang ZW, et al.Noise and vibration of diamond sawblade for concrete dry cutting. Key Engineering Materials,2006, 291-292: 103-108

55. C. Y. Wang, X. Wei, H. Yuan. Polishing of ceramic tiles. Materials & Manufacturing Processes, 2006, 17(3):401-413.

56. Zhang F L, Yuan H, Wang C Y, et al. Microstructure of Ni-Al-Diamond Composite Fabricated by Self-Propagating High Temperature Synthesis. Key Engineering Materials, 2005, 291-292(6):531-536.

57. Wang C Y, Qin Z, Hu Y N, et al. High-Speed Milling Experiments on the Extended Length of Milling Tool. Key Engineering Materials, 2005, 291-292(6):439-442.

58. Quan Y M, Wang C Y, He Z W. Experimental Investigation on the High-Speed Machining of Hardened Steel. Materials Science Forum, 2004, 471-472:339-343.

59. Wang C Y, Hu Y N, Ding H N. Cutting Forces in Sawing Process of Reinforced Concrete. Materials Science Forum, 2004, 471-472:292-297.

60. Hu YN, Wang CY, Wang JL, et al..Surface quality analysis of milling hardened die steel with micro-end mill.Materials Science Forum, 2004,471-472 : 374-379

61. Wang C Y, Sun Y H, Qin Z, et al. Platen Belt Grinding of Brittle Materials. Key Engineering Materials, 2004, 257-258(6):129-134.

62. Guo Z N, Huang Z G, Wang C Y. Smoothing CVD Diamond Films by Wire EDM with High Travelling Speed. Key Engineering Materials, 2004, 257-258:489-494.

63. Hu Y N, Wang C Y, Ding H N. The Mechanical Performance of Diamond Saw Blades with Special Structure. Key Engineering Materials, 2004, 259-260:141-145.

64. Zhou L, Wang C Y, Qin Z, et al. Wear Characteristics of Micro-End Mill in High-Speed Milling of Graphite Electrode. Key Engineering Materials, 2003, 259-260:858-863.

65. Zhang F L, Wang C Y, Zhu M. Nanostructured WC/Co composite powder prepared by high energy ball milling. Scripta Materialia, 2003, 49(11):1123-1128.

66. Wang C. How abrasive machining affects surface characteristics of vitreous ceramic tile. American Ceramic Society Bulletin, 2003:9201-9208.

67. Wei X, Wang C Y, Zhou Z H. Study on the fuzzy ranking of granite sawability. Journal of Materials Processing Technology, 2003, 139(139):277-280.

68. Wang C Y, Clausen R. Computer simulation of stone frame sawing process using diamond blades. International Journal of Machine Tools & Manufacture, 2003, 43(6):559-572.

69. Wang C Y, Wei X, Pan Z C, et al. Effects of Surfactant in Stone Machining. Key Engineering Materials, 2003, 250(16):194-199.

70. Hu Y N, Wang C Y, Wei X, et al. Thermodynamic Analysis of Diamond Saw Blades for Dry Cutting. Key Engineering Materials, 2003, 250(16):233-238.

71. Wang C Y, Clausen R. Marble cutting with single point cutting tool and diamond segments. International Journal of Machine Tools & Manufacture, 2002, 42(42):1045-1054.

72. Guo Z N, Wang C Y, Zhang F L, et al. Polishing of CVD Diamond Films. Key Engineering Materials, 2001, 202-203:165-170.

73. Wang C Y, Clausen R. Stone Sawing Forces by Single Diamond Segment. Key Engineering Materials, 2001, 202-203:61-66.

74. Qin Z X, Wang C Y, Zhang F L, et al. Properties of Granite Grinding Surface. Key Engineering Materials, 2001, 202-203:285-288.

1. 专利

发明专利15项：

1. Al₂O₃ or Al₂O₃-contained multilayer coatings for silicon nitride cutting tools by physical vapor deposition and methods of making the same.S Wu, Y Long, Q Wang, C Wang - US Patent 9,290,847, 2016

2. 一种吸音隔音复合材料的制备方法. 发明专利授权号：ZL 2012 1 0521776.9 发明人：张凤林；林希宁；曹根；王成勇.

3. 一种舒适高效的辐射板冷暖空调末端. 发明专利授权号：ZL 2011 1 0416696.2 发明人：胡映宁；林俊；李彪；王成勇；刘亚招；熊理国

4. 多晶硅铸锭炉热场结构. 发明专利授权号：ZL 2011 1 0122386.X 发明人：南志华；李文红；朱佰喜；王成勇；翟雨佳.

5. 腔式石墨舟. 发明专利授权号：ZL 2011 1 0082405.0 发明人：张志勇；李文红；朱佰喜；王成勇；南志华.

6. 一种纳米复合钛铬硅氮化物刀具涂层及其制备方法. 发明专利授权号:ZL 2010 1 0176320.4 发明人：王成勇；成晓玲；余东海；张凤林；匡同春.

7. 一种纳米复合钛铝硅氮化物刀具涂层及其制备方法. 发明专利授权号:ZL 2010 1 0176335.0 发明人：王成勇；成晓玲；余东海；张凤林；匡同春. (已实施转让许可)

8. 一种纳米复合钛铬铝硅氮化物刀具涂层及其制备方法. 发明专利授权号:ZL 2010 1 0176236.2 发明人：王成勇；成晓玲；余东海；张凤林；匡同春.

9. 一种利用花岗岩粉生产的低钙硅酸盐水泥及其制备方法. 发明专利授权号: ZL 2009 1 0038988.X 发明人：潘湛昌；徐慎颖；肖楚民；王成勇；魏志钢；胡光辉.

10. 一种用于微钻的扫描电镜检测的固定装置. 发明专利号:ZL 2009 1 0105380.4 发明人：杨凡；付连宇；王成勇.

11. 利用花岗岩粉与碱性铝渣生4A型沸石分子筛、石英砂的方法. 发明专利号:ZL 2009 1 0213996.3 发明人：潘湛昌；徐慎颖；肖楚民；王成勇；魏志钢；胡光辉.

12. 一种化学机械法金刚石膜抛光装置及其抛光方法. 发明专利授权号:ZL 2005 1 0034023.5 发明人：王成勇；陈冲；秦哲；张凤林. (已实施转让许可)

13. 一种多功能组合机床. 发明专利授权号:ZL 2005 1 0034022.0 发明人：王成勇；练国林；钟建新；袁慧；成云平. (已实施转让许可)

14. 金刚石材料抛光方法. 发明专利授权号:ZL 2003 1 0111774.3 发明人：王成勇，张凤林，陈春林，匡同春. (已实施转让许可)

15. 玻化砖抛光砂轮的组成. 发明专利授权号:ZL 2003 1 0111771.X 发明人：王成勇；袁慧；魏昕；秦哲.

16. 一种石材切割用冷却润滑液及制造方法. 发明专利授权号:ZL 99104907 发明人：王成勇；潘湛昌.

实用新型专利21项(部分列表)：

1. 一种用于PCB钻孔机的断针检测电路. 实用新型专利授权号：ZL 2015 2 0163955.9 发明人：王成勇；陈志顺；王晓初.

2. 一种柔性印刷电路板的微孔钻削装置. 实用新型专利授权号：ZL 2014 2 0864083.4 发明人：王成勇；郑李娟；李姗；廖冰淼.

3. 一种多层PCB微孔钻削温度测量装置. 实用新型专利授权号：ZL 2014 2 0863942.8 发明人：王成勇；郑李娟；李姗；廖冰淼.

4. 一种多层PCB钻孔钻削温度的测量装置. 实用新型专利授权号：ZL 2014 2 0864060.3 发明人：王成勇；廖冰淼；郑李娟；林淡填；黄欣

5. 平面研磨机的下盘驱动结构. 实用新型专利授权号：ZL 2014 2 0138339.3 发明人：王成勇；郑李娟；宋月贤；李胜蓝；黎清健；王启民.

6. 高精密单面研磨机的上盘结构. 实用新型专利授权号：ZL 2014 2 0138338.9 发明人：王成勇 郑李娟；宋月贤；李胜蓝；黎清健；王启民.

7. 一种提高挠性印刷电路板钻孔孔位精度的多层结构盖板. 实用新型专利授权号：ZL 2014 2 0864076.4 发明人：王成勇；郑李娟；李姗；廖冰淼；刘庆伦.

外观专利1项：

[1] 转速－线速度换算表，外观专利授权号98334055.2 ，发明人：王成勇; 肖洪; 魏昕.

通信地址

通信办公地点：广东工业大学工学二号馆350VIP浦京集团・(中国)有限公司

地址：广州大学城外环西路100号

邮政编码：510006

Tel:+86 20 39322206

Fax:+86 20 39322206

E-mail:cywang@gdut.edu.cn